Agitated Thin-Film Evaporator (ATFE)
Core ProcessWiped-film evaporator for high-vacuum distillation of dehydrated used oil — the industry-standard unit that separates base-oil distillate from asphaltic residue without thermal cracking.
Overview
Used oil cannot be distilled at atmospheric pressure: the temperatures needed would crack the oil and destroy the very properties being recovered. The agitated thin-film evaporator solves this with a heated cylindrical shell and an internal rotor whose blades spread the oil as a turbulent film a fraction of a millimetre thick on the heated wall. Residence time drops to seconds, heat transfer stays intense, and metals, polymers, carbon and asphaltenes leave with the bottom residue while clean distillate flashes off under deep vacuum. This is the workhorse of every modern re-refinery built in the last three decades — specified by STP, VTA and every serious licensor of used-oil technology. We fabricate the shell, jacket, rotor and drive train, hydro-test the jacket, and run a vacuum leak test before dispatch.
Technical Data
| Design code | ASME VIII Div. 1 (vacuum + jacket pressure design) |
| Jacket design pressure | 10 barg typical (thermic-oil duty) |
| Design temperature | 350 °C shell / 400 °C jacket |
| Material of construction | SA-240 Gr. 304/316L wetted parts; CS jacket |
| Corrosion allowance | 1.5 mm CS / 0 mm SS |
| Rotor speed | 100–400 rpm, VFD controlled |
| Testing | Hydrostatic jacket test, vacuum leak test ≤ 1 mbar·L/s |
| Surface finish | Ra ≤ 0.8 µm wetted surface, pickle & passivate |
Applications
- Base-oil recovery from used lubricating oil
- High-boiling residue concentration
- Deodorizing / light-end stripping under vacuum
Materials & Standards
- ASME VIII Div. 1
- TEMA nomenclature for jacketed vessels
- ASTM D2892 boiling-range conventions for cut definition
Options & Variants
- CIP spray system for the vapor body
- Double mechanical seal with barrier fluid
- Insulation & aluminium cladding package
- Skid-mounted with condenser, receiver and vacuum connection
Related in Process Equipment
View allClay Treatment Reactors (Kettles)
Mild-steel reactors with dish-ends, stirrer and stuffing box for clay treatment and de-odorizing of distilled base-oil cuts.
View detailsDistillation Columns & Structures
Vacuum distillation columns with structured internals, designed around your feedstock and target base-oil cuts.
View detailsCondensers — SS Tube Bundles
Shell-and-tube condensers in SS 304/316 for vacuum distillation and clay-treatment service, dish-end single-pass construction.
View details