Process Equipment
Reactors, columns, condensers & receivers
The process equipment train is where used oil becomes product. Vacuum distillation cannot run without vessels engineered for vacuum service: reactors for clay treatment and dehydration, columns with internals cut for base-oil fractions, condensers that pull vapor back into liquid, and receivers sized for every cut. We fabricate these vessels in mild steel and stainless steel to ASME pressure-vessel conventions, with dish-ends, nozzles, internals and supports completed in our own works before dispatch.
- Designed for full vacuum and thermal cycling duty
- Dish-end construction in MS or SS as service demands
- Internals, packing and trays engineered per cut plan
- Hydraulic and vacuum testing before dispatch

FlagshipClay Treatment Reactors (Kettles)
Mild-steel reactors with dish-ends, stirrer and stuffing box for clay treatment and de-odorizing of distilled base-oil cuts.
- Capacity: 10,000 L per reactor (custom sizes available)
- Shell / dish-end: 6 mm MS body · 8 mm MS dish-ends
- Diameter: 2.0 m typical

Distillation Columns & Structures
Vacuum distillation columns with structured internals, designed around your feedstock and target base-oil cuts.
- Design basis: Feed assay and cut plan per project
- Internals: Structured packing or valve trays
- Operating mode: High vacuum, below thermal-cracking threshold

Condensers — SS Tube Bundles
Shell-and-tube condensers in SS 304/316 for vacuum distillation and clay-treatment service, dish-end single-pass construction.
- Tube bundle: 200 tubes · 3/8" OD × 3 m long
- Tube material: SS 316 (premium) or SS 304 (value)
- Construction: Dish-end, single-pass, compact make

Flush Drums & Receivers
Receivers for waste-oil cuts and moisture collection, plus flush drums — supplied in standard or custom configurations.
- Construction: Dish-end, vacuum-rated
- Sizing: Per cut plan and hold-up requirement
- Nozzles: Vapor, liquid, drain, level and instrument connections

Silencer Pots
Receiver silencer pots downstream of water-ring vacuum pumps, for quiet and stable vacuum operation.
- Sizing: Matched to vacuum pump capacity
- Construction: Heavy-gauge shell with baffled internals
- Connections: Inlet / outlet flanged, drain at bottom
Core ProcessAgitated Thin-Film Evaporator (ATFE)
Wiped-film evaporator for high-vacuum distillation of dehydrated used oil — the industry-standard unit that separates base-oil distillate from asphaltic residue without thermal cracking.
- Function: Vacuum distillation of dehydrated used oil
- Heating surface: 5–40 m² per unit, multiples in parallel for capacity
- Operating pressure: 1–10 mbar abs. in the vapor body

Dehydration & Degassing Vessel
Flash dehydration vessel with demister and vent condenser — removes water, gasoline-range lights and dissolved VOCs before oil ever reaches the vacuum train.
- Function: Flash removal of water + light ends (gasoline, VOCs)
- Duty: Full plant feed rate, continuous
- Internals: Feed distributor + wire-mesh demister pad

Clay Contact Polishing Vessel
Agitated clay-contacting vessel where vacuum-distilled base oil meets bleaching clay — restoring colour, oxidation stability and the properties of new oil.
- Function: Adsorptive colour & polar-impurity removal
- Clay dose: 2–5 wt% of oil, per feed quality
- Operating temperature: 90–120 °C
