API Oil–Water Separator

Corrugated-plate-interceptor (CPI) separator to API 421 — turns oily condensate, wash water and runoff into an effluent that passes environmental inspection.

Enquire About This Product

Overview

A re-refinery handles oil in the open more than most process plants: dehydrator water, condenser condensate, floor wash-downs, storm runoff from the tank farm. Every stream ends up carrying free oil, and the environmental permit says how much may leave. The API separator is the standard answer: a long rectangular basin where flow slows, oil droplets rise, and corrugated plates tilted at 45° multiply the rise area so even small droplets reach the surface before the outlet. Oil skims off the top to recovery; settled solids scrape or purge from the bottom; the middle layer leaves at 10–15 ppm free oil. We size the basin from your worst-case water rate and worst-case droplet size — not average — and supply it with the sludge draw-off and oil-skimmer provisions.

Technical Data

Design standardAPI 421 (monographs on refinery effluents)
Design flowSized from peak water rate, m³/h
Hydraulic retentionPer API 421 rise-rate & spread criteria
Material of constructionCarbon-steel basin (coated) or RC concrete
InternalsPP/SS304 corrugated plate packs
Oil collectionAdjustable oil-skimming weir + outlet pipe
SludgeHopper + purge valves for manual/pump draw-off
TestingWater-fill leak test (steel) / hydraulic test

Applications

  • Dehydrator water treatment
  • Plant oily runoff and wash-water
  • Tank-farm storm-water treatment

Materials & Standards

  • API 421
  • Effluent discharge per KSA environmental permit (NCEC) limits

Options & Variants

  • Automatic oil-skimmer mechanism
  • Cover for H2S/odor control
  • Coalescing media upgrade to 20 ppm
  • Integration with sludge dewatering (filter press)