Gasketed Plate Heat Exchanger
Compact gasketed plate heat exchanger for product cooling, heat recovery and tempering duties — three times the heat transfer per square metre of shell-and-tube, in a quarter of the footprint.
Overview
Where shell-and-tube exchangers win on pressure and fouling tolerance, the plate heat exchanger wins everywhere else: the corrugated plates force turbulence at low velocity, so heat-transfer coefficients run 3–5× shell-and-tube, the approach temperature can close to 1–2 °C, and the whole pack pulls apart for cleaning in an afternoon. In a re-refinery the natural duties are product rundown cooling, heat recovery between hot bottoms and cold feed, and thermic-loop trim cooling. Plate materials and gaskets are matched to the service — NBR/EPDM gaskets for oil-water, Viton for hot oil, SS316 or titanium plates where chloride water attacks. We size from your duty sheet, supply with frame, plates, gaskets and connections, and document the thermal performance.
Technical Data
| Design code | ASME VIII Div. 1 with code stamp option |
| Design pressure | To 25 barg (standard frame) |
| Design temperature | To 180 °C (gasket limited) |
| Plates | SS304/SS316L, 0.5–0.6 mm pressed, herringbone pattern |
| Gaskets | NBR / EPDM / Viton glued or clip-on |
| Frame | Painted carbon steel, epoxy coated |
| Connections | Studded or flanged, ANSI 150# |
| Documentation | Thermal datasheet, GA drawing, test certificates |
Applications
- Base-oil rundown cooling
- Feed preheating by hot bottoms (heat recovery)
- Thermic-oil trim cooling
- Water/oil utility heat exchange
Materials & Standards
- ASME VIII Div. 1
- AHRI liquid-to-liquid certification available
- FDA-compliant gasket options for edible-adjacent duties
Options & Variants
- Wide-gap plates for fibrous/sludge service
- Titanium plates for seawater cooling
- Semi-welded plates for aggressive media
- Insulated jacket on frame
Related in Utilities & Separation
View allCooling Towers
Induced-draft cooling towers sized for the full condenser heat load — with margin for future capacity expansion.
View detailsCentrifuges
Two-stage centrifuge separation: solid–liquid separation plus a clarifier that splits two liquid phases and solids.
View detailsFilter Press
Plate-and-frame filter press for clay and solids separation after treatment.
View details